Powered By alczapanta


You are not connected. Please login or register

Cyclone Box Updates

View previous topic View next topic Go down  Message [Page 1 of 1]

1 Cyclone Box Updates on Fri Sep 11, 2009 11:44 am

beezee_chang

avatar
Moderator
Moderator
11-09-2009 Cyclone HOT - Asic 3168 - Update - 7100,2323,2330,2720 - UNLOCKING Ready!
Hi,
Bulk update 11-09-2009 for Cyclone Box is READY.

Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:

7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20

Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !

Unlocking is FREE.
It is FIRST standalone solution (without usage of internet).
Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).

However, we added new service called "Super DCT4" inside a box.
To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future).
The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that with box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.

Download link: rapidshare.com/files/27837846...te11092009.exe

How to check if my box is Super DCT4 Activated?
New build of sw showing this automaticlly upon launching DCT4/WD2 module, example:


Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7917
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000005
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000001
Card Firmware Revision: 0108
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,97v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work

How to activate Super DCT4 in my box?
It is very simple. Go to "Credits" module (same as you are using for calculating ASK/RPL), and click big "Activate SUPER DCT4" button. In seconds you should see similiar message:

Started Super DCT4 Activation at 03:45:20
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 4F67674F5428157448CEACEB547BC575
Cyclone Server (1.0.0.483), Cyclone Box Team 2008, 2009 - Ready.

Super DCT4 Activated Successfully! Credits Left: 950
Please, replug your box from USB now, and use Maintenance Function to upgrade it again.
After next upgrade, box will be activated for Super DCT4 Functions!
As message says, replug your box and re-upgrade it again. After re-upgrade your box is SUPER-DCT4-READY

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7917
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v1.07, (Sep 11 2009 03:35:10, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags
Box Serial Number: C0000005
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000001
Card Firmware Revision: 0108
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,98v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,96v PASSED
VBAT Voltage 4,93v PASSED
Box VPP disabled
VPP Voltage 0,02v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work

And here is some unlocked phones...

MCU Version V 06.31
MCU Date 24-03-09
Product RM-438
Manufacturer (c) Nokia
IMEI 356791022371169
Mastercode 725723337
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-438_V 06.31.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020883C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009321
FlashChip[1]: 0x0020883C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009321
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020883C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
MSID-Crypted: 841F1AFABBAFF9CCECE9143110
MSID-Plain: 2C40BAE9004D1547A8000000
FAID-Crypted: 49676CAD5E5871D32474F41B
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x01220000-0x0123FFFF]
Erasing NOR Region [0x01440000-0x0145FFFF]
Erasing NOR Region [0x014C0000-0x014DFFFF]
Erasing NOR Region [0x01C00000-0x01C1FFFF]
Erase taken 4.625s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 3.109s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature D8E30AAEFA78CD56
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553567910223711600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (C1B065BFEB7F7F6E4ADE043BDEF28AFF433AFCBE)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

MCU Version V 57.20
MCU Date 09-02-09
Product RM-298
Manufacturer (c) Nokia
IMEI 359560015082365
Mastercode 4711427143
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-298_V 57.20.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0020881C @ 0x01000000, ST, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x0020881C @ 0x02000000, ST, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x0020881C (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,02V
MSID-Crypted: 84BF9D8E695715F78638B733B0
MSID-Plain: 2C40BAE90016370AA9000000
FAID-Crypted: A3DD17B2526DBD2FB3CDBAED
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x013E0000-0x013FFFFF]
Erasing NOR Region [0x01480000-0x0149FFFF]
Erasing NOR Region [0x016C0000-0x016DFFFF]
Erasing NOR Region [0x01C20000-0x01C3FFFF]
Erase taken 2.141s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 20.750s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature 7969BC800C852B5B
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553595600150823600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (EA251E362B1C5BEC9D9128151B64D19173B31B78)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

MCU Version V 08.20
MCU Date 30-06-09
Product RM-512
Manufacturer (c) Nokia
IMEI 356911035333218
Mastercode 76526175
Selecting unlock method...
Using Super DCT4 Activation
Search in: C:\Lab\K\Cyc\UnlockData\
Searching for: RM-512_V 08.20.sunlock_img
Writing patch file...
Booting UPP...
UPP ID: 3168 [HW_UNKNOWN]
shadow, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x00898981 @ 0x01000000, Intel, SectorSize: 128kB, Ext: 00009221
FlashChip[1]: 0x00898981 @ 0x02000000, Intel, SectorSize: 128kB, Ext: 00009221
Signature: AD7EB61B23100340C605E40120A20000
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_intel.fia, Type: Algorithm, Target: FlashChip[0] 0x00898981 (256Mbits), Rev: 7.4.80.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0,04V
MSID-Crypted: 84049DEF3E46EBDCAFB36F38E6
Using MSID-FAID Cache, Not wasting card
FAID-Crypted: A9E2206DCDF87F867EDCD4D9
Flashbus Write baud set to 6.50Mbits
4 Region(s) to erase
Erasing NOR Region [0x01220000-0x0123FFFF]
Erasing NOR Region [0x01440000-0x0145FFFF]
Erasing NOR Region [0x014C0000-0x014DFFFF]
Erasing NOR Region [0x01CE0000-0x01CFFFFF]
Erase taken 3.359s
Writing 32 blocks...
Sending Super DCT4 Emulator...
Emulator sent OK!
All blocks written OK! Time taken 36.94s
Terminating flash session
Box VPP disabled
Asic 11
HW Signature 9D213E0BB6FC7D27
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 000000000003000B
Simlock Aux 000B5555
Simlock IMEI 00553569110353332100
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Asking card to sign HW Signature...
Signed OK (9D991119D205D01F82D6144491ED7788675CB5B2)
Simlock Security - UNKNOWN
Writing SP...
New SP Accepted OK!
Phone unlocked OK!

Best Regards,
Cyclone Team.

(more to come )


2 New Cyclone Installer v1.03 is ready on Tue Jan 05, 2010 10:14 am

sam3578

avatar
Admin
Admin
Hi,
First of all, happy new year to all of our customers.
New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).

=====================
Installer v1.03
02.01.2010
=====================
- Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
- Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0

- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
- SL Area might be repaired using UNLOCK button for SL2 phones
- RPL Write bugs fixed ("simlock not accepted" after few tries)
- Path "/" problem fixed
- Memory manager updated to v4.94
- New skin manager introduced (6.53) - removed flash files selection bugs
- GUI redesigned a bit
- Nokia Connectivity Cable Driver updated to v7.1.22
- 2760h RM-391 v06.83 Unlock / Relock added
- 2330c RM-512 v09.55 Unlock / Relock added
- 2330c-b RM-513 v09.55 Unlock / Relock added
- 2720f RM-519 v08.42 Unlock / Relock added
- 2720f-b RM-519 v08.42 Unlock / Relock added
- 2720f RM-519 v09.55 Unlock / Relock added
- 2720f-b RM-519 v09.55 Unlock / Relock added
- SX4 Bypass during BB5 Unlock removed, is no needed anymore
- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
- 6220c,3600s booting fixed in new firmware
- New Secure bootloader v02.10 introduced
- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
- Secure BootAgent v1.00 introduced in new firmware
- Firmware RTOS Code Updated to v6.0.1
- Slightly code optimizations and stability improvments in new firmware
- Secure Bootloader upgrade introduced after box maintenance
- Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C

Here is example phones unlocked by new RPL Method,
5800 SW v31.x:

Code:
BB5 Unlock Started...
MCU Version   V ICPR72_09w20.8
MCU Date   09-07-09
Product      RM-356
Manufacturer   (c) Nokia
IMEI      353205037049770
Mastercode   323571474
Simlock Server   SIMLOCK SERVER
Simlock Key   2600300000000000
Simlock Profile   8000000000000000
Simlock Key Cnt   0
Simlock FBUS Cnt   0
Simlock [1,1]   State: CLOSED   Type: MCC-MNC   Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:       00000295
CMT_EM_ASIC_ID:       00000B22
CMT_PUBLIC_ID:       16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:       4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support and selecting Unlock Method...
Selected Unlock Method: RPL Calculation
Booting RAP...
CMT_SYSTEM_ASIC_ID:    000000010000022600010006400C192101031103
CMT_EM_ASIC_ID:       00000295
CMT_EM_ASIC_ID:       00000B22
CMT_PUBLIC_ID:       16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID:    00
CMT_ROOT_KEY_HASH:    CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID:       4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Receiving RPL from Server...
Cyclone Server (1.0.0.549), Cyclone Box Team 2008, 2009, 2010 - Ready.
Disconnected from Cyclone Server
Credits Left: 880
Saving RPL File to "RM-356_353205037049770_2010-01-02_015618.Unlock.RPL"
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version   V ICPR72_09w20.8
MCU Date   09-07-09
Product      RM-356
Manufacturer   (c) Nokia
IMEI      353205037049770
Mastercode   323571474
Simlock Server   SIMLOCK SERVER
Simlock Key   2440700000000000
Simlock Profile   0000000000000000
Simlock Key Cnt   0
Simlock FBUS Cnt   0
Simlock [1,1]   State: OPENED   Type: MCC-MNC   Data: FFFFFF
Simlock [1,2]   State: OPENED   Type: GID   Data: FFFF
Simlock [1,3]   State: OPENED   Type: GID   Data: FFFF
Simlock [1,4]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [1,5]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [2,1]   State: OPENED   Type: MCC-MNC   Data: FFFFFF
Simlock [2,2]   State: OPENED   Type: GID   Data: FFFF
Simlock [2,3]   State: OPENED   Type: GID   Data: FFFF
Simlock [2,4]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [2,5]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [3,1]   State: OPENED   Type: MCC-MNC   Data: FFFFFF
Simlock [3,2]   State: OPENED   Type: GID   Data: FFFF
Simlock [3,3]   State: OPENED   Type: GID   Data: FFFF
Simlock [3,4]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [3,5]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [4,1]   State: OPENED   Type: MCC-MNC   Data: FFFFFF
Simlock [4,2]   State: OPENED   Type: GID   Data: FFFF
Simlock [4,3]   State: OPENED   Type: GID   Data: FFFF
Simlock [4,4]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [4,5]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [5,1]   State: OPENED   Type: MCC-MNC   Data: FFFFFF
Simlock [5,2]   State: OPENED   Type: GID   Data: FFFF
Simlock [5,3]   State: OPENED   Type: GID   Data: FFFF
Simlock [5,4]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [5,5]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [6,1]   State: OPENED   Type: MCC-MNC   Data: FFFFFF
Simlock [6,2]   State: OPENED   Type: GID   Data: FFFF
Simlock [6,3]   State: OPENED   Type: GID   Data: FFFF
Simlock [6,4]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [6,5]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [7,1]   State: OPENED   Type: MCC-MNC   Data: FFFFFF
Simlock [7,2]   State: OPENED   Type: GID   Data: FFFF
Simlock [7,3]   State: OPENED   Type: GID   Data: FFFF
Simlock [7,4]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Simlock [7,5]   State: OPENED   Type: IMSI   Data: FFFFFFFFFFFFFFFF
Unlock finished!


For Prices info please visit
http://cyclonebox.com/credits.php?page=CreditsInfos

Download Link: rapidshare.com CycloneBoxInstaller.exe
! BOX FIRMWARE UPDATE IS NEEDED TO USE LATEST UPDATE !

Best Regards,
Cyclone Team



Last edited by sam3578 on Fri Jan 08, 2010 10:27 am; edited 1 time in total

behindGSM

avatar
Moderator
Moderator
=====================
Installer v1.04
06.01.2010
=====================
- Included latest critical hotfix for old BB5 unlocking methods when phone after unlock was still locked, update is highly RECOMMENDED!

rapidshare.com CycloneBoxInstaller.exe

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum