Powered By alczapanta


You are not connected. Please login or register

how to flash ENO firmware

Go down  Message [Page 1 of 1]

1 how to flash ENO firmware on Thu Sep 17, 2009 6:41 pm

beezee_chang

avatar
Moderator
Moderator
What is ENO software:
ENO software handles all basic functions inside the device. It is required to be flashed into the device when Combo Memory is Changed due to by some wrong operations like; Downgrade Phone wrongly, Flash with wrong Firmware, Erase Phone with wrong file or Phone is on White or Blank display.

After flash with ENO Firmware your phone will be normalized and then you simply flash again with correct firmware package, select any product code according to your choice and press Flash button.





batter is use JAF tool, suppose you have N95

Flashing Procedure:

- Install RM-159_ENO_engine_software_v3.0

- Make sure that RM-159 device is attached

- Open JAF Tool

- Switch to BB5 Tab

- Select Manual Flash and USE INI

- Select your model and ini

- Find and select "0530865 ENO" Product Code

- Press Flash button, Software should start the Flash procedure. . .

- When Flash procedure done successfully then Full Flash again with any product code which you like and it will be oK.

(After ENO Full Flash with correct firmwar

Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum